Use of radial forces for fault detection in tapping

A model-based method for fault detection in tapping based on torque and radial forces is proposed. The method allows the identification of faults typical of a tapping operation including axial misalignment, tap runout, tooth breakage both singly and together. The validation experiments have been run on aluminum 356 workpieces for different combinations of process faults. Results have shown that the model predictions are in good agreement with the experimental radial force and torque signals under various fault conditions.     

流量自动控制的设计与实现

文章通过分析多相流模拟井的实际工作要求 ,提出了简单实用的流量自动控制模型。应用成型的计算机数据采集和控制模块及稳定可靠的流量控制部件 ,实现了各相流量的自动控制过程。该流量自动控制系统调节精度高、速度快、整体造价低 ,在实际应用中取得了良好的效果。     

大港白水头地区低阻油气层测井评价

在对白水头地区低阻油层的地质特征、物性特征及成因环境进行了分析研究后 ,应用测井曲线特征集法 ,把白水头油田常规油气层、低阻油气层、油水同层、水层等看成是独立的地质事件 ,建立了它们与测井曲线特征之间的对应关系 ,利用这种关系对未知地质事件进行了预测划分。最后根据所建模型定量计算储层各种参数 ,收到了良好的地质效果 ,表明测井曲线特征集法对于识别多成因的低阻油层是一种有效方法     

沙漠生物结皮土壤发育特征的研究

通过对沙漠生物结皮层相关的土壤特性研究表明,结皮层不仅具有明显的养分富集和细粒物质的聚集作用,而且结皮层腐殖质成份的含量以及其分子结构和复杂程度也在增加。腐殖质光学特性的变化趋势明显反映了不同地区结皮层土壤发育的地带性特征。结皮层持水量明显高于沙层,并对降水再分配有一定影响。     

Fast microwave detection system for coherent synchrotron radiation study at KEK: Accelerator test facility

A fast room temperature microwave detection system based on the Schottky Barrier-diode detector was created at the KEK ATF (Accelerator Test Facility). It was tested using Coherent Synchrotron Radiation (CSR) generated by the 1.28 GeV electron beam in the damping ring. The speed performance of the detection system was checked by observing the CSR from a multi-bunch (2.8 ns bunch separation time) beam. The theoretical estimations of CSR power yield from an edge of bending magnet as well as new injection tuning method are presented. A very high sensitivity of CSR power yield to the longitudinal electron distribution in a bunch is discussed.     

A VLSI architecture for a half-edge-based corner detector

Corner detection is a low-level feature detection operator that is of great use in image processing applications, for example, optical flow and structure from motion by image correspondence. The detection of corners is a computationally intensive operation. Past implementations of corner detection techniques have been restricted to software. In this paper we propose an efficient very large-scale integration (VLSI) architecture for detection of corners in images. The corner detection technique is based on the half-edge concept and the first directional derivative of Gaussian. Apart from the location of the corner points, the algorithm also computes the corner orientation and the corner angle and outputs the edge map of the image. The symmetrical properties of the masks are utilized to reduce the number of convolutions effectively, from eight to two. Therefore, the number of multiplications required per pixel is reduced from 1800 to 392. Thus, the proposed architecture yields a speed-up factor of 4.6 over conventional convolution architectures. The architecture uses the principles of pipelining and parallelism and can be implemented in VLSI.     

观测值序列的粗差探测方法

基于小波分析和未确知滤波理论，研究了对观测序列中粗差进行探测和剔除的方法，并结合实例进行了分析和比较，表明这2种方法得到的探测结果基本一致，均具备较好的应用价值。此外，进一步分析了2种方法的优点和局限性，为实际应用提供了有用的参考。根据2种处理方法的特点，提出了粗差探测的综合探测方法。     

毛家河水电站库区岩溶发育特征及邻谷渗漏分析

毛家河水电站位于碳酸盐岩地区，库首距左岸邻谷可渡河14—23km、距右岸邻谷北盘江干流14．8km，水库两岸大型落水洞、溶洞及地下岩溶管道相对较为发育。为初步判断水库存在邻谷渗漏的可能性，对水库两岸可溶岩地层岩溶发育形态、特征及规律进行了勘察，并根据现场地质调查资料对3条可疑渗漏带进行了分析论证。     

光电系统对空目标探测距离评估方法研究

为估算光电系统的目标探测距离，研究了目标的红外辐射特性和在实验室内对系统灵敏度进行测试的方法。在系统设计阶段，可以利用系统设计参数估算光电系统目标探测距离；在系统样机研制完成后，可以利用系统灵敏度测试，对光电系统目标探测距离进行估算。经实际系统试飞试验表明目标探测距离评估方法是可行的。     

Conceptual damage-sensitive features for structural health monitoring: Laboratory and field demonstrations

The use of damage-sensitive features to evaluate structural condition or health is a very critical aspect of structural health monitoring. The purpose of this paper is to investigate the potential of two different damage-sensitive features for detecting damage. Different damage scenarios are simulated on a large-scale laboratory structure and a three-span highway bridge for demonstration. The features presented in this paper are the modal flexibility-based deflection and curvature both of which are obtained directly from dynamic properties. In the literature, flexibility associated with mode shapes and mode shapes curvatures have been mostly explored. In this study, multi-input–multi-output dynamic data are used to obtain modal flexibility, which is a close approximation to the actual flexibility. A main novelty is that the curvature is calculated from the deflected shapes using the modal flexibility as opposed to using modal vectors. In this paper, the theory of the methodology is explained and then experimental studies and results are presented. For the experimental studies, the laboratory specimen and the three-span bridge were gradually damaged. It is shown that both deflection and curvature are conceptual and physically meaningful features for damage detection and localization. The issues and the requirements for these features to perform successfully are also presented.